SWG with inner ring and outer ring are suitable for flat face and raise face flanges SWG with inner ring and outer ring are suitable for flat face and raise face flanges,it is reinforced by inner and outer ring which can provide a heat and corrosion barrier,protect the winding...

Octagonal Type cross section RTJ ring joint gaskets are designed for flanges with standard grooves Octagonal Type cross section RTJ ring joint gaskets are designed for flanges with standard grooves,interchangeable with oval ring joint gaskets on modern octagonal grooved...

Oval Type cross section RTJ ring joint gaskets are designed for flanges with standard grooves        R(oval) RTJ ring joint gasket is manufactured into oval cross section,it is suit for ANSI B 16.5ASME B16.47, series A flange,can be used in pressures...

R(oval) RTJ ring joint gasket is manufactured into oval cross section R(oval) RTJ ring joint gasket is manufactured into oval cross section,it is suit for ANSI B 16.5ASME B16.47, series A flange,can be used in pressures up to 1000 PSI.The oval type is the only gasket that will fit...

Octagonal Type cross section RTJ ring joint gaskets are designed for flanges with standard grooves R(oval) RTJ ring joint gasket is manufactured into oval cross section,it is suit for ANSI B 16.5ASME B16.47,  series A flange,can be used in pressures up to 1000 PSI.The oval...

BX type ring joint gaskets are designed for API 6 BX flange grooves only BX type ring joint gaskets are designed for API 6 BX flange grooves only,it is suitable for higher-pressure ratings starting at 2,000 lbs and ending with 20,000 lbs,incorporate a pressure balance hole to...

R(oval) RTJ ring joint gasket is manufactured into oval cross section R(oval) RTJ ring joint gasket is manufactured into oval cross section,it is suit for ANSI B 16.5ASME B16.47,  series A flange,can be used in pressures up to 1000 PSI.The oval type is the only gasket that...

BX type ring joint gaskets are designed for BX flange grooves only BX type ring joint gaskets are designed for  BX flange grooves only,it is suitable for higher-pressure ratings starting at 2,000 lbs and ending with 20,000 lbs,incorporate a pressure balance hole to ensure...

Teflon Clad Gasket(o-ring,seal gasket) 1.temperature:<260oC 2.pressure:<4.0Mpa 3.coefficient:m=2.5 4.size:~1100mm Teflon Clad Gasket(o-ring,seal  gasket)Structure1.Teflon    clad  gasket  is  composed  of  inside  ...

yiyu this product is regarded as an ideal materal to be used in the PTFE Lined pipes and other equipments yiyu this product is regarded as an ideal materal to beused in the PTFE Lined pipes and other equipments ,and uesd as the best swaling meterials for the joint of pipes and...